3DBODY.TECH 2021 - Paper 21.12

H. Lin et al., "User-Oriented Product Development with Advanced Scan Solutions", Proc. of 3DBODY.TECH 2021 - 12th Int. Conf. and Exh. on 3D Body Scanning and Processing Technologies, Lugano, Switzerland, 19-20 Oct. 2021, #12, https://doi.org/10.15221/21.12.


User-Oriented Product Development with Advanced Scan Solutions


Huangmei LIN, Ellen WENDT, Doudou ZHANG, Jessica BOLL, Jana SIEGMUND, Sybille KRZYWINSKI, Yordan KYOSEV

TU Dresden, Institute of Textile Machinery and High Performance Material (ITM), Germany


Recent developments in scanning technology have enabled researchers to scan persons at up to 180 frames per second with an accuracy of less than 1mm during movement. This allows a highly precise analysis of the interaction between body and textile as well as deformations of the fabric during movements. With the Move4D scanner, dynamic movement can be recorded and analysed very quickly. Thus, the authors are capable of making a significant contribution to the improvement of functional (e.g. sports and medical) and protective clothing by a digital process chain. The result of this research can be used for the applications on the product development of the tight-fitting and loose-fitting garments. Advantages of the digital linked process chain based on scanner are as follows: i) The design cycle of clothing is shortened by early simulation. The influence of the material behaviour on the product design can be analysed at an early stage; ii) Modification between the 3D development and the 2D patterns is convenient and intuitive; iii) Sophisticated digital data management helps to increase the efficiency of the entire process chain.


Advanced scanning technology, User typical body position, Processing, 3D fit simulation


Full paper: 2112lin.pdf
Proceedings: 3DBODY.TECH 2021, 19-20 Oct. 2021, Lugano, Switzerland
Paper id#: 12
DOI: 10.15221/21.12
Presentation video: 3DBodyTech2021_12_Lin.mp4

Copyright notice

© Hometrica Consulting - Dr. Nicola D'Apuzzo, Switzerland, hometrica.ch.
Reproduction of the proceedings or any parts thereof (excluding short quotations for the use in the preparation of reviews and technical and scientific papers) may be made only after obtaining the specific approval of the publisher. The papers appearing in the proceedings reflect the author's opinions. Their inclusion in these publications does not necessary constitute endorsement by the editor or by the publisher. Authors retain all rights to individual papers.

Note: click the + on the top left of the page to open/close the menu.