Paper 16.061

P. Volonghi, et al., "3D Scanning for Hand Orthotic Applications: A Comparative Assessment between Static and Real-Time Solutions", in Proc. of 7th Int. Conf. on 3D Body Scanning Technologies, Lugano, Switzerland, 2016, pp. 61-69, https://doi.org/10.15221/16.061.

Title:

3D Scanning for Hand Orthotic Applications:
A Comparative Assessment between Static and Real-Time Solutions

Authors:

Paola VOLONGHI 1, Alberto SIGNORONI 1, Gabriele BARONIO 2

1 Università degli Studi di Brescia, Dip. di Ingegneria dell'Informazione, Brescia, Italy;
2 Università degli Studi di Brescia, Dip. di Ingegneria Meccanica e Industriale, Brescia, Italy

Abstract:

The personalization of medical devices has made considerable progress in recent years. In the orthopedic field, following a typical reverse engineering approach, 3D scanning of anatomical regions of interest is the starting point for various kind of customized manufacturing, followed by the design of the device and its fabrication, particularly with additive manufacturing techniques. In this context, particularly challenging issues emerge from the customization of hand orthotic devices. The present work focuses on the identification and comparison of suitable scanning procedures in order to acquire accurate hand and fingers 3D models. Two different types of structured light scanners (static and real-time) were compared and several configuration of the hand were studied and acquired, allowing to evidence strength and weakness of the various approaches, while keeping in consideration the target application. In particular, the issues related to the presence of involuntary movements during acquisition are considered and possible solving approaches indicated.

Details:

Full paper: 16.061.pdf
Proceedings: 3DBST 2016, 30 Nov.-1 Dec. 2016, Lugano, Switzerland
Pages: 61-69
DOI: 10.15221/16.061

Copyright notice

© Hometrica Consulting - Dr. Nicola D'Apuzzo, Switzerland, www.hometrica.ch.
Reproduction of the proceedings or any parts thereof (excluding short quotations for the use in the preparation of reviews and technical and scientific papers) may be made only after obtaining the specific approval of the publisher. The papers appearing in the proceedings reflect the author's opinions. Their inclusion in these publications does not necessary constitute endorsement by the editor or by the publisher. Authors retain all rights to individual papers.

Proceedings of 3DBODY.TECH International Conferences on 3D Body Scanning & Processing Technologies, © Hometrica Consulting, Switzerland